Connecting Kurdene wireless earbuds can be challenging for some users, with many reporting difficulties in successfully pairing their Kurdene wireless earbuds.
To assist with this, we’ve created a Kurdene wireless earbuds pairing guide to help you easily connect your earbuds.
For this guide, we’ve chosen the Kurdene S8 wireless earbuds, as they are the most popular model from the company.
How to Pair Kurdene Wireless Earbuds
- First, remove the earbuds from the charging case and peel off the insulating film from the connectors.
- Next, place the earbuds back into the charging case. You’ll notice the red LED light on both earbuds, indicating that they are charging.
- Afterward, take both earbuds out of the charging case. The LED lights on both earbuds will flash red and blue, signaling that they are pairing with each other.
- The pairing process typically takes 2-3 seconds. Once paired, only one earbud will continue flashing red and blue, while the other will stop blinking. This indicates that the earbuds have successfully paired with each other and are ready to connect to a compatible Bluetooth device.
- Now, open the Bluetooth settings on your phone, tablet, or computer. The earbuds will appear as ‘S8.’ Select this name to connect the earbuds to your device.
- Although it’s mentioned in the manuals that one earbud will keep flashing a blue LED every six seconds, this may not occur with newer units.
- Your Kurdene wireless earbuds are now successfully paired with your Bluetooth device, whether it’s a phone, tablet, or laptop.
How to Reset Kurdene Wireless Earbuds?
- Ensure the earbuds are out of the charging case and connected to each other. There is no need to pair them with your phone or any other device at this point.
- When the earbuds are connected, the LED light on one earbud will flash red and blue.
- Next, press the haptic button four times on either earbud. Afterward, a red LED will illuminate on both earbuds for two seconds before turning off.
- Now, remove the Bluetooth connection from your device by unpairing the Kurdene wireless earbuds.
- You have successfully factory reset your Kurdene wireless earbuds.
You might also like the Tagry X08 earbuds review.
How to Turn on Kurdene Wireless Earbuds Independently?
Typically, when you remove the Kurdene wireless earbuds from the charging case, they automatically turn on.
However, if the earbuds remain out of the case for an extended period without pairing to a device, they will automatically power off to conserve battery.
To turn on the earbuds manually without the charging case, press and hold the haptic button on each earbud for 3-5 seconds. The LED lights on both earbuds will begin flashing red and blue alternately.
This is how you can easily turn on the Kurdene wireless earbuds without using the charging case.
You may also like the Kvidio headphones review.
What to do if the earbuds aren’t pairing with each other?
If your earbuds aren’t pairing with each other, try the following steps:
- Press and hold the haptic button on each earbud for 7 seconds. You may see various LED flashes during this process, but continue holding the buttons for the full 7 seconds.
- Ensure both earbuds are fully charged, as low battery levels can cause pairing issues.
- Make sure the earbuds are in close proximity to one another to allow proper pairing.
- If available, confirm that your earbuds have the latest firmware version.
Following these steps should resolve the issue of your Kurdene wireless earbuds not pairing with each other.
Also Read: Are Raycon earbuds good?
That concludes the Kurdene wireless earbuds pairing guide. If you have any further questions, feel free to ask us in the comments section.